Clutch centering tool
K1200RS/GT/LT
R1150 and R1100S
R1100S, R1150
R1200
Associated BMW No. 21217670454
Clutch centering tool
K75/100/1100 not K1200
R850/1100, not R1150 or R1100S
Associated BMW No. 21211464795
Fork tube, high quality pattern
F800S and ST models
Associated BMW No.31427709576
Screen clamp screw at corner, (6 required), each
RT models
Associated BMW No. 07119928477
Speedo bracket rubber bush, large
Associated BMW No. 31421235620
Speedometer, green numbers, code 1.244
Not 45/65, G/S, ST
Associated BMW No. 62121243469
Last one - No longer available!
Also available used with 6 months warranty. Phone or email to enquire!
Classic panniers for tubular frames, with grab rail cut outs, 33L, pair
Associated BMW No. 46542300059
James says: "If you really want some practical panniers, which have a classic original look and all operate as they should, then consider these. Not only so the locks operate smoothly and work, but there is also a good attempt to make them seal. I'm not suggesting for a minute that these are 100% waterproof before you take them down to fifty fathoms to test them, but an effort has been made!"
Also available used with 6 months warranty. Phone or email to enquire!
Clutch or brake cable grommet/cup at handlebar end, seals adjuster
Associated BMW No. 32731230038
Throttle cable, (2 cables at handlebar), each
R100GS pre '91
R80 GS/R '91 on
Associated BMW No. 32731458091
Brake lever
K75/100 Not ABS, not 16v
R80/100 paralever
Associated BMW No. 32721457058
No longer available
Also available used with 6 months warranty. Phone or email to enquire!
Hand guard set, black
Pre 1991 (with rectangular handlebar reservoir)
R 65 GS, R 80 G/S, R 80 ST (80-92) (11/1987 — 11/1992)
R 80 GS, R 100 GS, PD (87-90) (12/1986 — 07/1990)
Associated BMW No. 71609062160
Seat cover (with white piping & lengthway flutes)
/5 long wheel base and early /6
Seat complete with fittings
RS/RT/S, not mono
Associated BMW No. 52531237834
James says: "If you are restoring a bike and don't want to spend a small fortune on the BMW original (even if it is still available) this seat is a very good alternative. It looks good, fits very well, and has the attention to detail that makes all the difference"
Seat complete with grab rail and fittings
/7 models
Associated BMW No. 52531237832
James says: "If you are restoring a bike and don't want to spend a small fortune on the BMW original (even if it is still available) this seat is a very good alternative. It looks good, fits very well, and has the attention to detail that makes all the difference"
Seat complete with grab rail,(transverse pattern)
/6 models
James says: "If you are restoring a bike and don't want to spend a small fortune on the BMW original (even if it is still available) this seat is a very good alternative. It looks good, fits very well, and has the attention to detail that makes all the difference"
Seat complete with grab rail and fittings
LWB /5 and /6, not R90S
Associated BMW No. 52531233960
James says: "If you are restoring a bike and don't want to spend a small fortune on the BMW original (even if it is still available) this seat is a very good alternative. It looks good, fits very well, and has the attention to detail that makes all the difference"
Seat complete with grab rail and fittings
Early SWB /5
AssociateE BMW No. 52531230197
James says: "If you are restoring a bike and don't want to spend a small fortune on the BMW original (even if it is still available) this seat is a very good alternative. It looks good, fits very well, and has the attention to detail that makes all the difference"
Seat complete with twin grab rails and fittings
SWB /5 models
Associated BMW No. 52531230197
We also have this seat available in the later style where the cover has longitudinal mouldings and a single loop around grab rail.
James says: "If you are restoring a bike and don't want to spend a small fortune on the BMW original (even if it is still available) this seat is a very good alternative. It looks good, fits very well, and has the attention to detail that makes all the difference"
Seat catch cover retaining screws, stainless steel, 2 required
Associated BMW No. 07119928562
Lock barrel and key- used in many applications
R45/55/65/75/80/95/100 not G/S, - ST Seat lock and pocket lock
K1/100 - seat lock
Associated BMW No. 51251243277
Subframe mounting bolt, washers & nut, stainless set of 4
'81 on
Associated BMW No. 46511242001
Subframe mounting bolts, washers & nut, stainless set of 4
Pre '81
Associated BMW No. 46511231093
Bottom LHS bolt, washers and nut, stainless steel
Twin shock models
Associated BMW No. 33531230249
Bottom RHS nut and washer, stainless steel
Twin shock models
Associated BMW No. 07119901301
Top mounting bolt, washers and nut, stainless steel
Twinshock models
Associated BMW No. 07119901169
IKON shock (was known as KONI)
R65/80/100 monoshock all models
Associated BMW No. 33532322734
Main stand bolts & spacers, set
'81 on & R45/65
Associated BMW No. 46522302046
Main stand bolts & spacers set
Pre '81
Associated BMW No. 46521233087
Bottom yoke pinch bolt and washer, stainless steel, set of 2
Associated BMW No. 07119901088
Steering damper knob screw, stainless steel
Associated BMW No. 46622313516
White plastic bush for "81 on original fork springs
Twinshock and R80G/s
Associated BMW No. 31422301724